Packard Predictor

Packard Predictor
Packard
aka	Type aka here, not up there
Introduction	1956
Class	Concept Car
Body Style	how many doors+how many seats+what type of body
Length	222 in
Width	85 in
Height	54.125 in
Wheelbase	122 in
Weight	6000 lb (curb)
Transmission	transmission + drive
Engine	engine
Power	N/A hp @ N/A rpm N/A lb-ft of torque @ N/A rpm
Similar	similar (competition)
Designer	Designer (lead designer if it was a team effort)

The Packard Pedictor was a show car built to tour automotive shows in 1956 and display possible future Packard styling. It was built on a stretched 122-ich Clipper chasis and was powered by a 352-cid V-8. the idea was thought up by William Schmidt approved by Packard president James Nance and designed by Richard Teague. The orginal name for the concept was the Packard Projector. The vehicle had a very long, low and wide body and was noted for its minimal use of chrome and push-button controls.

See Wikicars' comprehensive Packard Predictor Review.

Photos

• 

  3/4 Rear and Left Side

• 

  3/4 Front and Right Side

• 

  1956 Rendering

• 

  Profile

Unique Attributes

• Roof doors operated by push buttons that eased ingress and egress
• Retractable vertical rear window
• Unique "canopy" C-pillar
• Bucket seats front and rear with full-lenght console
• Hidden headlamps
• Windshield that wraps onto the roof
• Reversible seat cushions- leather on one side, fabric on the other.

Specs

Engine

• Type: OHV V-8, cast iron block and cylinder heads
• Displacement: 352 cubic inches
• Bore x stroke: 4.0 x 3.5 inches
• Compression ratio: 9.5:1
• Horsepower @ rpm: 260 @ 4,600
• Torque @ rpm: 380-lbs.ft. @ 2,800
• Valvetrain: Hydraulic lifters
• Main bearings: Five
• Fuel system: Single Rochester Type 4GC four-barrel carburetor
• Lubrication system: Full pressure
• Electrical system: 12-volt, Auto-Lite generator
• Exhaust system: Dual exhausts exiting through the rear bumper

Transmission

• Type: Pushbutton-controlled Twin-Ultramatic 2-speed planetary automatic with torque converter and direct-drive lockup

• Ratios
  • 1st: 1.82:1
  • 2nd: 1.00:1
  • Reverse: 1.63:1

Differential

• Type: Hypoid gears
• Ratio: 3.54:1
• Drive-axels: Semi-floating

Steering

• Type: Worm and roller
• Ratio: 22.5:1
• Turns, lock-to-lock: 3.9

Brakes

• Type: 4-wheel hydraulic, Bendix power assist
• Front/Rear: 12-inch drums

Chasis and Body

• Construction: All-steel body on channel-section frame with central X-member
• Body style: Two-door, four-passenger hardtop
• Layout: front engine, rear-wheel drive

Suspension

• Front: Unequal A-arms, anti-roll bar, full-length torsion bars with automatic load level, tubular shocks
• Rear: Solid axle, full-lengthe torsion bars with automatic load level, tubular shocks

Wheels and Tires

• Wheels: Pressed Steel
• Front/Rear: 7.60 x 15 inches
• Tires, Front/Rear: 7.60 x 15 whitewalls

Track

• Front track: 59.7 inches
• Rear track: 60 iches

Capacities

• Crankcase: 5 quarts
• Cooling system: 6.75 gallons
• Fuel tank: 20 gallons
• Automatic trans.: 11 quarts
• Rear axle: 3.5 pints

Calculated Data

• Horsepower per c.i.d.: 0.74
• Weight per horsepower: 23.08 pounds
• Weight per c.i.d.: 17.05 pounds

Pricing

Packard spent $70,000 dollars on the Predictor in 1956.

Criticisms

Please make sure to keep critiques in a third-person point of view. If using criticisms from a reputable automotive source, then please make sure to cite the quote.

Worldwide

If the vehicle is sold in other markets worldwide, then this is the section to mention that information. Also, mention if the <MODEL> goes by another name in these other markets.

Design quirks and oddities

Refer to any pop-culture tidbits about the vehicle in this section.

Awards

List out notable awards that the model has recieved while in production. Boldface the company or organization that gives out the award, and Italicize the name of the award.

External Links

Please include any external sites that were used in collaborating this data, including manufacturer sites, in this section.

This article or section contains information about a concept automobile. It is likely to contain information of a speculative nature, but such speculation is usually sourced from the automotive news media, the automaker's media press releases, or other news sources. Concept cars, or similar evolutionary vehicles based on them, may never see production. The content and specifications for those selected for continuation may change significantly as the concept evolves, or as production nears if it is launched, and as more information becomes available. Concept automobiles, and their derivatives if any, are subject to delays or cancellation by the automaker.