Glasspar G2 - Revision history

Red marquis at 05:49, 15 February 2007

2007-02-15T05:49:05Z

← Older revision		Revision as of 05:49, 15 February 2007
Line 11:		Line 11:
	About this time the Korean War was raging, and Tritt was having difficulty acquiring polyester resin for his cars and boats. The Naugatuck Chemical Company in Naugatuck, Connecticut, after seeing the Boxer, sent Glasspar plenty of Vibrin resin and an order for a G2 sports car to promote their product to the auto industry. Naugatuck's G2 was modified and named the Alembic I and was shown at the Philadelphia Plastics Exhibit in 1952. ''Life'' then featured the car in a story, as did the ''New York Times'', the ''Wall Street Journal'' and many auto trade magazines. The Glasspar Company then went public and sold stock to raise capital.		About this time the Korean War was raging, and Tritt was having difficulty acquiring polyester resin for his cars and boats. The Naugatuck Chemical Company in Naugatuck, Connecticut, after seeing the Boxer, sent Glasspar plenty of Vibrin resin and an order for a G2 sports car to promote their product to the auto industry. Naugatuck's G2 was modified and named the Alembic I and was shown at the Philadelphia Plastics Exhibit in 1952. ''Life'' then featured the car in a story, as did the ''New York Times'', the ''Wall Street Journal'' and many auto trade magazines. The Glasspar Company then went public and sold stock to raise capital.

	Bill Tritt also designed and/or built fiberglass car bodies for Robert "Woody" Woodill, Strassberger Motor Company, British [[Singer ~~(car)~~\|Singer Car Company]], Willys, Kaiser, [[Volvo]], and [[Walt Disney]]. His last fiberglass car design was the Ascot which the Glasspar board of directors rejected in favor of staying with the core business of boat building. Tritt left Glasspar shortly afterward.		Bill Tritt also designed and/or built fiberglass car bodies for Robert "Woody" Woodill, Strassberger Motor Company, British [[Singer\|Singer Car Company]], Willys, Kaiser, [[Volvo]], and Walt Disney. His last fiberglass car design was the Ascot which the Glasspar board of directors rejected in favor of staying with the core business of boat building. Tritt left Glasspar shortly afterward.

	~~[[Image:Autopia Glasspar Car.jpg\|thumb\|left\|Original Autopia Fiberglass car]][[~~Disneyland]], in [[Anaheim, California]], was building its [[Autopia]] automobile track and commissioned Bill Tritt and Glasspar to build the fiberglass car bodies. They were small, single-seat, self-powered cars using [[Briggs and Stratton]] lawn-mower type engines with centrifugal clutches. The cars were originally designed to use aluminum wrap-around bumpers provided by [[Kaiser Aluminum]], but later changed to the more suitable steel.		Disneyland, in Anaheim, California, was building its [[Autopia]] automobile track and commissioned Bill Tritt and Glasspar to build the fiberglass car bodies. They were small, single-seat, self-powered cars using [[Briggs and Stratton]] lawn-mower type engines with centrifugal clutches. The cars were originally designed to use aluminum wrap-around bumpers provided by Kaiser Aluminum, but later changed to the more suitable steel.

	[[Category:Sports cars]]		[[Category:Sports cars]]

Red marquis at 05:48, 15 February 2007

2007-02-15T05:48:20Z

← Older revision		Revision as of 05:48, 15 February 2007
Line 1:		Line 1:
	The '''Glasspar G2''' was a [[sports car]] first manufactured by [[Bill Tritt]] in 1949. It is no longer built today. It was the first all-[[fiberglass]] body sports car built by an American car manufacturer. It was built as both a production model (in limited numbers) or as a kit car.		The '''Glasspar G2''' was a [[sports car]] first manufactured by [[Bill Tritt]] in 1949. It is no longer built today. It was the first all-fiberglass body sports car built by an American car manufacturer. It was built as both a production model (in limited numbers) or as a kit car.

	The Glasspar G2 was born in 1949 when Bill Tritt helped his friend, Air Force Major Ken Brooks, design a body for the [[hot rod]] Ken was building. The car consisted of a stripped down [[Willys]] [[Jeep]] chassis with a highly modified V8 engine mounted on it. Bill Tritt, at the time, was building small fiberglass boat hulls in his [[Costa Mesa]], [[California]], factory and he convinced Ken that fiberglass was the ideal material for the hot rod body.		The Glasspar G2 was born in 1949 when Bill Tritt helped his friend, Air Force Major Ken Brooks, design a body for the [[hot rod]] Ken was building. The car consisted of a stripped down [[Willys]] [[Jeep]] chassis with a highly modified V8 engine mounted on it. Bill Tritt, at the time, was building small fiberglass boat hulls in his Costa Mesa, California, factory and he convinced Ken that fiberglass was the ideal material for the hot rod body.

	Tritt made sketches of a body and, with Ken and his Ken's wife's approval, proceeded to make the body plug and mold for a low-slung, continental-style [[roadster]]. A year and a half later, with a great deal of trial and error, the body was finished, set on the chassis and christened the [[Brooks Boxer]] in mid 1951.		Tritt made sketches of a body and, with Ken and his Ken's wife's approval, proceeded to make the body plug and mold for a low-slung, continental-style [[roadster]]. A year and a half later, with a great deal of trial and error, the body was finished, set on the chassis and christened the [[Brooks Boxer]] in mid 1951.

	~~[[Image:Kasier_Darrin.jpg\|thumb\|right\|Kaiser Darrin]]~~Bill Tritt had a keen interest in boats and cars. Before the [[World War II]], he studied marine architecture and boat building. He worked for Douglas Aircraft's Production Planning and Illustration Departments during World War II, and by 1945 had built a number of [[catamaran~~]] [[~~sailboats]]. In 1947, John Green, a [[yachtsman]] friend, paid Tritt to design and build a racing sailboat in the twenty foot range. Fiberglass seemed the logical construction material, and Otto Bayer of Wizard Boats was enlisted as laminator. The boat was named the [[Green Dolphin]], and four were built. This was Tritt's introduction to ~~[[Fiberglass molding\|~~fiberglass-reinforced plastic]] (FRP). By 1947 he was building small fiberglass boats, and built the first ever fiberglass masts and spars for sailboats. This company became the [[Glasspar]] Company and moved to larger quarters in [[Santa Ana, California]], in the early 1950s. By the mid 1950s, Glasspar was producing 15 to 20 percent of all fiberglass boats sold in the U.S. Other fiberglass cars of the time can be found here: [http://ladawri.com]		Bill Tritt had a keen interest in boats and cars. Before the World War II, he studied marine architecture and boat building. He worked for Douglas Aircraft's Production Planning and Illustration Departments during World War II, and by 1945 had built a number of catamaran sailboats. In 1947, John Green, a yachtsman friend, paid Tritt to design and build a racing sailboat in the twenty foot range. Fiberglass seemed the logical construction material, and Otto Bayer of Wizard Boats was enlisted as laminator. The boat was named the Green Dolphin, and four were built. This was Tritt's introduction to fiberglass-reinforced plastic (FRP). By 1947 he was building small fiberglass boats, and built the first ever fiberglass masts and spars for sailboats. This company became the Glasspar Company and moved to larger quarters in Santa Ana, California, in the early 1950s. By the mid 1950s, Glasspar was producing 15 to 20 percent of all fiberglass boats sold in the U.S. Other fiberglass cars of the time can be found here: [http://ladawri.com]

	The Brooks Boxer was an immediate success when shown at the 1951 Los Angeles Motorama along with three other early fiberglass cars: the big Lancer, the small Skorpion, and the Wasp. Only Tritt's car went on to be the first production fiberglass car. The Boxer mold was then modified and used to produce the beautiful Glasspar G2 sports car that year.		The Brooks Boxer was an immediate success when shown at the 1951 Los Angeles Motorama along with three other early fiberglass cars: the big Lancer, the small Skorpion, and the Wasp. Only Tritt's car went on to be the first production fiberglass car. The Boxer mold was then modified and used to produce the beautiful Glasspar G2 sports car that year.

	About this time the [[Korean War]] was raging, and Tritt was having difficulty acquiring [[polyester]] resin for his cars and boats. The ~~[[Pleather\|~~Naugatuck Chemical Company]] in [[Naugatuck, Connecticut]], after seeing the Boxer, sent Glasspar plenty of [[Vibrin]] resin and an order for a G2 sports car to promote their product to the auto industry. Naugatuck's G2 was modified and named the Alembic I and was shown at the [[Philadelphia]] Plastics Exhibit in 1952. ~~[[Image:Autopia Poster.png\|thumb\|right\|Autopia Poster]]~~''~~[[Life (magazine)\|~~Life]]'' then featured the car in a story, as did the ''[[New York Times]]'', the ''[[Wall Street Journal]]'' and many auto trade magazines. The Glasspar Company then went public and sold stock to raise capital.		About this time the Korean War was raging, and Tritt was having difficulty acquiring polyester resin for his cars and boats. The Naugatuck Chemical Company in Naugatuck, Connecticut, after seeing the Boxer, sent Glasspar plenty of Vibrin resin and an order for a G2 sports car to promote their product to the auto industry. Naugatuck's G2 was modified and named the Alembic I and was shown at the Philadelphia Plastics Exhibit in 1952. ''Life'' then featured the car in a story, as did the ''New York Times'', the ''Wall Street Journal'' and many auto trade magazines. The Glasspar Company then went public and sold stock to raise capital.

	Bill Tritt also designed and/or built fiberglass car bodies for Robert "Woody" Woodill, Strassberger Motor Company, British [[Singer (car)\|Singer Car Company]], Willys, Kaiser, [[Volvo]], and [[Walt Disney]]. His last fiberglass car design was the Ascot which the Glasspar board of directors rejected in favor of staying with the core business of boat building. Tritt left Glasspar shortly afterward.		Bill Tritt also designed and/or built fiberglass car bodies for Robert "Woody" Woodill, Strassberger Motor Company, British [[Singer (car)\|Singer Car Company]], Willys, Kaiser, [[Volvo]], and [[Walt Disney]]. His last fiberglass car design was the Ascot which the Glasspar board of directors rejected in favor of staying with the core business of boat building. Tritt left Glasspar shortly afterward.

Red marquis at 05:46, 15 February 2007

2007-02-15T05:46:17Z

New page

The '''Glasspar G2''' was a [[sports car]] first manufactured by [[Bill Tritt]] in 1949. It is no longer built today. It was the first all-[[fiberglass]] body sports car built by an American car manufacturer. It was built as both a production model (in limited numbers) or as a kit car.

The Glasspar G2 was born in 1949 when Bill Tritt helped his friend, Air Force Major Ken Brooks, design a body for the [[hot rod]] Ken was building. The car consisted of a stripped down [[Willys]] [[Jeep]] chassis with a highly modified V8 engine mounted on it. Bill Tritt, at the time, was building small fiberglass boat hulls in his [[Costa Mesa]], [[California]], factory and he convinced Ken that fiberglass was the ideal material for the hot rod body.

Tritt made sketches of a body and, with Ken and his Ken's wife's approval, proceeded to make the body plug and mold for a low-slung, continental-style [[roadster]]. A year and a half later, with a great deal of trial and error, the body was finished, set on the chassis and christened the [[Brooks Boxer]] in mid 1951.

[[Image:Kasier_Darrin.jpg|thumb|right|Kaiser Darrin]]Bill Tritt had a keen interest in boats and cars. Before the [[World War II]], he studied marine architecture and boat building. He worked for Douglas Aircraft's Production Planning and Illustration Departments during World War II, and by 1945 had built a number of [[catamaran]] [[sailboats]]. In 1947, John Green, a [[yachtsman]] friend, paid Tritt to design and build a racing sailboat in the twenty foot range. Fiberglass seemed the logical construction material, and Otto Bayer of Wizard Boats was enlisted as laminator. The boat was named the [[Green Dolphin]], and four were built. This was Tritt's introduction to [[Fiberglass molding|fiberglass-reinforced plastic]] (FRP). By 1947 he was building small fiberglass boats, and built the first ever fiberglass masts and spars for sailboats. This company became the [[Glasspar]] Company and moved to larger quarters in [[Santa Ana, California]], in the early 1950s. By the mid 1950s, Glasspar was producing 15 to 20 percent of all fiberglass boats sold in the U.S. Other fiberglass cars of the time can be found here: [http://ladawri.com]

The Brooks Boxer was an immediate success when shown at the 1951 Los Angeles Motorama along with three other early fiberglass cars: the big Lancer, the small Skorpion, and the Wasp. Only Tritt's car went on to be the first production fiberglass car. The Boxer mold was then modified and used to produce the beautiful Glasspar G2 sports car that year.

About this time the [[Korean War]] was raging, and Tritt was having difficulty acquiring [[polyester]] resin for his cars and boats. The [[Pleather|Naugatuck Chemical Company]] in [[Naugatuck, Connecticut]], after seeing the Boxer, sent Glasspar plenty of [[Vibrin]] resin and an order for a G2 sports car to promote their product to the auto industry. Naugatuck's G2 was modified and named the Alembic I and was shown at the [[Philadelphia]] Plastics Exhibit in 1952. [[Image:Autopia Poster.png|thumb|right|Autopia Poster]]''[[Life (magazine)|Life]]'' then featured the car in a story, as did the ''[[New York Times]]'', the ''[[Wall Street Journal]]'' and many auto trade magazines. The Glasspar Company then went public and sold stock to raise capital.

Bill Tritt also designed and/or built fiberglass car bodies for Robert "Woody" Woodill, Strassberger Motor Company, British [[Singer (car)|Singer Car Company]], Willys, Kaiser, [[Volvo]], and [[Walt Disney]]. His last fiberglass car design was the Ascot which the Glasspar board of directors rejected in favor of staying with the core business of boat building. Tritt left Glasspar shortly afterward.

[[Image:Autopia Glasspar Car.jpg|thumb|left|Original Autopia Fiberglass car]][[Disneyland]], in [[Anaheim, California]], was building its [[Autopia]] automobile track and commissioned Bill Tritt and Glasspar to build the fiberglass car bodies. They were small, single-seat, self-powered cars using [[Briggs and Stratton]] lawn-mower type engines with centrifugal clutches. The cars were originally designed to use aluminum wrap-around bumpers provided by [[Kaiser Aluminum]], but later changed to the more suitable steel.

[[Category:Sports cars]]