Semi-automatic transmission - Revision history

Red marquis: /* External Links */

2009-09-27T19:04:35Z

External Links

← Older revision		Revision as of 19:04, 27 September 2009
Line 32:		Line 32:
	[[Category:Automotive transmission technologies]]		[[Category:Automotive transmission technologies]]
	[[Category:Auto parts]]		[[Category:Auto parts]]
			[[Category:Transmissions]]

Red marquis at 02:52, 12 December 2006

2006-12-12T02:52:00Z

← Older revision		Revision as of 02:52, 12 December 2006
Line 1:		Line 1:
			{{Transmission types}}
	'''Semi-[[Automatic transmission\|automatic]] transmission''', or '''clutchless manual transmission''', is a system which uses electronic sensors, processors and actuators to do gear shifts on the command of the driver. This removes the need for a clutch pedal which the driver needs to depress before making a gear change, since the clutch itself is actuated by electronic equipment which can synchronise the timing and torque required to make gear shifts quick and smooth. The system was designed by European [[automobile]] manufacturers to provide a better driving experience, especially in cities where congestion frequently causes stop-and-go traffic patterns.		'''Semi-[[Automatic transmission\|automatic]] transmission''', or '''clutchless manual transmission''', is a system which uses electronic sensors, processors and actuators to do gear shifts on the command of the driver. This removes the need for a clutch pedal which the driver needs to depress before making a gear change, since the clutch itself is actuated by electronic equipment which can synchronise the timing and torque required to make gear shifts quick and smooth. The system was designed by European [[automobile]] manufacturers to provide a better driving experience, especially in cities where congestion frequently causes stop-and-go traffic patterns.

Red marquis at 02:51, 12 December 2006

2006-12-12T02:51:23Z

← Older revision		Revision as of 02:51, 12 December 2006
Line 1:		Line 1:
	'''Semi-[[Automatic transmission\|automatic]] transmission''', or '''clutchless manual transmission''', is a system which uses electronic sensors, processors and actuators to do [[gear ~~shift]]s~~ on the command of the driver. This removes the need for a clutch pedal which the driver needs to depress before making a gear change, since the clutch itself is actuated by electronic equipment which can synchronise the timing and torque required to make gear shifts quick and smooth. The system was designed by European [[automobile]] manufacturers to provide a better driving experience, especially in cities where congestion frequently causes stop-and-go traffic patterns.		'''Semi-[[Automatic transmission\|automatic]] transmission''', or '''clutchless manual transmission''', is a system which uses electronic sensors, processors and actuators to do gear shifts on the command of the driver. This removes the need for a clutch pedal which the driver needs to depress before making a gear change, since the clutch itself is actuated by electronic equipment which can synchronise the timing and torque required to make gear shifts quick and smooth. The system was designed by European [[automobile]] manufacturers to provide a better driving experience, especially in cities where congestion frequently causes stop-and-go traffic patterns.

	In standard mass-production automobiles, the gear lever appears similar to manual shifts, except that the shift stick only moves forward and backward to shift into higher and lower gears respectively, instead of the traditional H-pattern. The Bugatti Veyron uses this approach for its 7-speed transmission. In [[Formula One]], the system is adapted to fit onto the steering wheel in the form of two ~~[[paddle]]s~~; depressing the right paddle shifts into a higher gear, while depressing the left paddle shifts into a lower one. Numerous road cars have inherited the same mechanism.		In standard mass-production automobiles, the gear lever appears similar to manual shifts, except that the shift stick only moves forward and backward to shift into higher and lower gears respectively, instead of the traditional H-pattern. The Bugatti Veyron uses this approach for its 7-speed transmission. In [[Formula One]], the system is adapted to fit onto the steering wheel in the form of two paddles; depressing the right paddle shifts into a higher gear, while depressing the left paddle shifts into a lower one. Numerous road cars have inherited the same mechanism.

	Hall effect sensors sense the direction of requested shift, and this input, together with a sensor in the [[gear box]] which senses the current speed and gear selected, feeds into a central processing unit. This unit then determines the optimal timing and torque required for a smooth clutch engagement, based on input from these two sensors as well as other factors, such as engine rotation, the Electronic Stability Program, [[air conditioner]] and [[dashboard]] instruments.		Hall effect sensors sense the direction of requested shift, and this input, together with a sensor in the [[gear box]] which senses the current speed and gear selected, feeds into a central processing unit. This unit then determines the optimal timing and torque required for a smooth clutch engagement, based on input from these two sensors as well as other factors, such as engine rotation, the Electronic Stability Program, air conditioner and dashboard instruments.

	The central processing unit powers a hydro-mechanical unit to either engage or disengage the clutch, which is kept in close synchronization with the gear-shifting action the driver has started. The hydro-mechanical unit contains a servomotor coupled to a gear arrangement for a linear actuator, which uses brake fluid from the braking system to impel a hydraulic cylinder to move the main clutch actuator.		The central processing unit powers a hydro-mechanical unit to either engage or disengage the clutch, which is kept in close synchronization with the gear-shifting action the driver has started. The hydro-mechanical unit contains a servomotor coupled to a gear arrangement for a linear actuator, which uses brake fluid from the braking system to impel a hydraulic cylinder to move the main clutch actuator.

Zerillos at 18:59, 14 September 2006

2006-09-14T18:59:24Z

← Older revision		Revision as of 18:59, 14 September 2006
Line 25:		Line 25:
	*Dual-clutch gearbox		*Dual-clutch gearbox
	*Electrohydraulic manual transmission (e.g. BMW sequential manual gearbox, SMG)		*Electrohydraulic manual transmission (e.g. BMW sequential manual gearbox, SMG)

			==External Links==
			* [http://www.zercustoms.com/news/Car-Hydraulics.php Car Hydraulics]

	[[Category:Automotive transmission technologies]]		[[Category:Automotive transmission technologies]]
	[[Category:Auto parts]]		[[Category:Auto parts]]

Rfujitani at 13:20, 26 June 2006

2006-06-26T13:20:19Z

Rfujitani at 13:16, 26 June 2006

2006-06-26T13:16:05Z

New page

{{transmission types}}
'''Semi-automatic transmission''', or '''clutchless manual transmission''', is a system which uses electronic sensors, processors and actuators to do [[gear shift]]s on the command of the [[driving|driver]]. This removes the need for a [[clutch]] pedal which the driver needs to depress before making a gear change, since the clutch itself is actuated by electronic equipment which can synchronise the timing and torque required to make gear shifts quick and smooth. The system was designed by [[Europe]]an [[automobile]] manufacturers to provide a better driving experience, especially in [[city|cities]] where congestion frequently causes stop-and-go [[traffic]] patterns.

In standard mass-production automobiles, the gear lever appears similar to manual shifts, except that the [[shift stick]] only moves forward and backward to shift into higher and lower gears respectively, instead of the traditional H-pattern. The Bugatti Veyron uses this approach for its 7-speed transmission. In [[Formula One]], the system is adapted to fit onto the [[steering wheel]] in the form of two [[paddle]]s; depressing the right paddle shifts into a higher gear, while depressing the left paddle shifts into a lower one. Numerous road cars have inherited the same mechanism.

[[Hall effect sensor]]s sense the direction of requested shift, and this input, together with a sensor in the [[gear box]] which senses the current speed and gear selected, feeds into a [[central processing unit]]. This unit then determines the optimal timing and torque required for a smooth clutch engagement, based on input from these two sensors as well as other factors, such as engine rotation, the [[Electronic Stability Program]], [[air conditioner]] and [[dashboard]] instruments.

The central processing unit powers a hydro-mechanical unit to either engage or disengage the clutch, which is kept in close synchronization with the gear-shifting action the driver has started. The hydro-mechanical unit contains a [[servo]]motor coupled to a gear arrangement for a linear [[actuator]], which uses [[brake fluid]] from the braking system to impel a hydraulic cylinder to move the main clutch actuator.

The power of the system lies in the fact that electronic equipment can react much faster and more precisely than a human, and takes advantage of the precision of electronic signals to allow a complete clutch operation without the intervention of the driver.

Historically, the first semi-automatic transmission which was marketed was the 1941 M4/Vacamatic Transmission by [[Chrysler]]. It was an early attempt at an automatic transmission that still required the use of a clutch, primarily to start and stop. Later, the Volkswagen Beetle came with an optional "Autostick", which was essentially a clutchless manual with three forward gears.

Citroen is one manufacturer that committed to semi automatic transmission. First appearing in 1955 on the Citroen DS, an hydraulic system was used to select gears and operate the conventional clutch using hydraulic servos. There was also a speed controller and idle speed step-up device, all hydraulically operated. This was a clutchless shifting with a single column mounted selector. The Citroen 2CV gained a device named 'Trafficlutch', a centrefugal clutch that enabled clutchless changes in the first two ratios only (for town driving). The DS's semi automatic transmission was nicknamed 'Citro-Matic' in the United States. Later, the manufacturer introduced optional semi automatic transmissions on their medium and large saloon and estate models in the 1970s; the Citroen GS and CX models had the option of 3 speed, semiautomatic transmission marketed as 'C matic'. This was simpler than the previous inasmuch as it used a floor mounted quadrant lever operating a contact breaker and conventional gear selector rods in series, a fluid coupling 'torque convertor' and wet plate clutch were cut in and out of phase by an electro valve controlled by the contact breaker. This system was simple in that it dispensed with the former use of hydraulics to operate a clutch AND select the gear ratios. Citroen semi automatic transmission of this era made no use of electronics, the entire gear selecting operation was carried out by simply moving the gear lever from one ratio to the next.

The German automobile manufacturer, NSU, produced a semi automatic system for the rotary engined Ro80 saloon car in the 1960s, similar in concept to Citroen's system except that it used an electric switch on the gear shifter which disengaged the clutch.

Drag Racers have their own type of clutchless manual transmissions. A Liberty is basically a manual transmission with no clutch, and is used in Pro Stock. The Lenco is a transmisson also used in drag racers. A Lenco is different from a Liberty because a Lenco uses planetary gears, like an automatic. Both transmissions can be manually shifted, or use an air shifter. However, they require a clutch to use when leaving off the line for traction. The Lenco uses separate levers to shift while the Liberty uses a single shifter hooked up to several levers. A variation of the Lenco called a Lencodrive utilizes a torque converter and no clutch.

Some variants of the system, such as [[Citroën]]'s Sensodrive, allow the driver to select automatic mode, in which the processor takes responsibility for gear changes. The car then drives much like a standard automatic, including features such as kickdown, but with fuel consumption pretty similar to a manual. Gears can be selected using either stick or paddles, both in manual control and as a temporal change in automatic mode (for example before starting to overtake another car).

Semi-automatic transmissions have also made its way into the truck and bus market in the early 2000s. [[Volvo]] offers its i-Shift on its heavier trucks and buses, while [[ZF Friedrichshafen AG]] markets its ASTronic system for buses and coaches. These gearboxes have a place in [[public transport]] as they have been shown to significantly reduce fuel consumption.

==Types==
*[[Direct-Shift Gearbox]]
*[[Dual-clutch gearbox]]
*[[Electrohydraulic manual transmission]] (e.g. BMW sequential manual gearbox, SMG)

[[Category:Automotive transmission technologies]]
[[Category:Auto parts]]

← Older revision		Revision as of 13:20, 26 June 2006
Line 1:		Line 1:
	~~{{transmission types}}~~		'''Semi-[[Automatic transmission\|automatic]] transmission''', or '''clutchless manual transmission''', is a system which uses electronic sensors, processors and actuators to do [[gear shift]]s on the command of the driver. This removes the need for a clutch pedal which the driver needs to depress before making a gear change, since the clutch itself is actuated by electronic equipment which can synchronise the timing and torque required to make gear shifts quick and smooth. The system was designed by European [[automobile]] manufacturers to provide a better driving experience, especially in cities where congestion frequently causes stop-and-go traffic patterns.
	'''Semi-automatic transmission''', or '''clutchless manual transmission''', is a system which uses electronic sensors, processors and actuators to do [[gear shift]]s on the command of the ~~[[driving\|~~driver]]. This removes the need for a [[clutch]] pedal which the driver needs to depress before making a gear change, since the clutch itself is actuated by electronic equipment which can synchronise the timing and torque required to make gear shifts quick and smooth. The system was designed by ~~[[Europe]]an~~ [[automobile]] manufacturers to provide a better driving experience, especially in ~~[[city\|~~cities]] where congestion frequently causes stop-and-go [[traffic]] patterns.

	In standard mass-production automobiles, the gear lever appears similar to manual shifts, except that the [[shift stick]] only moves forward and backward to shift into higher and lower gears respectively, instead of the traditional H-pattern. The Bugatti Veyron uses this approach for its 7-speed transmission. In [[Formula One]], the system is adapted to fit onto the [[steering wheel]] in the form of two [[paddle]]s; depressing the right paddle shifts into a higher gear, while depressing the left paddle shifts into a lower one. Numerous road cars have inherited the same mechanism.		In standard mass-production automobiles, the gear lever appears similar to manual shifts, except that the shift stick only moves forward and backward to shift into higher and lower gears respectively, instead of the traditional H-pattern. The Bugatti Veyron uses this approach for its 7-speed transmission. In [[Formula One]], the system is adapted to fit onto the steering wheel in the form of two [[paddle]]s; depressing the right paddle shifts into a higher gear, while depressing the left paddle shifts into a lower one. Numerous road cars have inherited the same mechanism.

	[[Hall effect ~~sensor]]s~~ sense the direction of requested shift, and this input, together with a sensor in the [[gear box]] which senses the current speed and gear selected, feeds into a [[central processing unit]]. This unit then determines the optimal timing and torque required for a smooth clutch engagement, based on input from these two sensors as well as other factors, such as engine rotation, the [[Electronic Stability Program]], [[air conditioner]] and [[dashboard]] instruments.		Hall effect sensors sense the direction of requested shift, and this input, together with a sensor in the [[gear box]] which senses the current speed and gear selected, feeds into a central processing unit. This unit then determines the optimal timing and torque required for a smooth clutch engagement, based on input from these two sensors as well as other factors, such as engine rotation, the Electronic Stability Program, [[air conditioner]] and [[dashboard]] instruments.

	The central processing unit powers a hydro-mechanical unit to either engage or disengage the clutch, which is kept in close synchronization with the gear-shifting action the driver has started. The hydro-mechanical unit contains a ~~[[servo]]motor~~ coupled to a gear arrangement for a linear [[actuator]], which uses [[brake fluid]] from the braking system to impel a hydraulic cylinder to move the main clutch actuator.		The central processing unit powers a hydro-mechanical unit to either engage or disengage the clutch, which is kept in close synchronization with the gear-shifting action the driver has started. The hydro-mechanical unit contains a servomotor coupled to a gear arrangement for a linear actuator, which uses brake fluid from the braking system to impel a hydraulic cylinder to move the main clutch actuator.

	The power of the system lies in the fact that electronic equipment can react much faster and more precisely than a human, and takes advantage of the precision of electronic signals to allow a complete clutch operation without the intervention of the driver.		The power of the system lies in the fact that electronic equipment can react much faster and more precisely than a human, and takes advantage of the precision of electronic signals to allow a complete clutch operation without the intervention of the driver.

	Historically, the first semi-automatic transmission which was marketed was the 1941 M4/Vacamatic Transmission by [[Chrysler]]. It was an early attempt at an automatic transmission that still required the use of a clutch, primarily to start and stop. Later, the Volkswagen Beetle came with an optional "Autostick", which was essentially a clutchless manual with three forward gears.		Historically, the first semi-[[Automatic transmission\|automatic]] transmission which was marketed was the 1941 M4/Vacamatic Transmission by [[Chrysler]]. It was an early attempt at an [[Automatic transmission\|automatic]] transmission that still required the use of a clutch, primarily to start and stop. Later, the Volkswagen Beetle came with an optional "Autostick", which was essentially a clutchless manual with three forward gears.

	Citroen is one manufacturer that committed to semi automatic transmission. First appearing in 1955 on the Citroen DS, an hydraulic system was used to select gears and operate the conventional clutch using hydraulic servos. There was also a speed controller and idle speed step-up device, all hydraulically operated. This was a clutchless shifting with a single column mounted selector. The Citroen 2CV gained a device named 'Trafficlutch', a centrefugal clutch that enabled clutchless changes in the first two ratios only (for town driving). The DS's semi automatic transmission was nicknamed 'Citro-Matic' in the United States. Later, the manufacturer introduced optional semi automatic transmissions on their medium and large saloon and estate models in the 1970s; the Citroen GS and CX models had the option of 3 speed, semiautomatic transmission marketed as 'C matic'. This was simpler than the previous inasmuch as it used a floor mounted quadrant lever operating a contact breaker and conventional gear selector rods in series, a fluid coupling 'torque convertor' and wet plate clutch were cut in and out of phase by an electro valve controlled by the contact breaker. This system was simple in that it dispensed with the former use of hydraulics to operate a clutch AND select the gear ratios. Citroen semi automatic transmission of this era made no use of electronics, the entire gear selecting operation was carried out by simply moving the gear lever from one ratio to the next.		Citroen is one manufacturer that committed to semi [[Automatic transmission\|automatic]] transmission. First appearing in 1955 on the Citroen DS, an hydraulic system was used to select gears and operate the conventional clutch using hydraulic servos. There was also a speed controller and idle speed step-up device, all hydraulically operated. This was a clutchless shifting with a single column mounted selector. The Citroen 2CV gained a device named 'Trafficlutch', a centrefugal clutch that enabled clutchless changes in the first two ratios only (for town driving). The DS's semi [[Automatic transmission\|automatic]] transmission was nicknamed 'Citro-Matic' in the United States. Later, the manufacturer introduced optional semi [[Automatic transmission\|automatic]] transmissions on their medium and large saloon and estate models in the 1970s; the Citroen GS and CX models had the option of 3 speed, semiautomatic transmission marketed as 'C matic'. This was simpler than the previous inasmuch as it used a floor mounted quadrant lever operating a contact breaker and conventional gear selector rods in series, a fluid coupling 'torque convertor' and wet plate clutch were cut in and out of phase by an electro valve controlled by the contact breaker. This system was simple in that it dispensed with the former use of hydraulics to operate a clutch AND select the gear ratios. Citroen semi [[Automatic transmission\|automatic]] transmission of this era made no use of electronics, the entire gear selecting operation was carried out by simply moving the gear lever from one ratio to the next.

	The German automobile manufacturer, NSU, produced a semi automatic system for the rotary engined Ro80 saloon car in the 1960s, similar in concept to Citroen's system except that it used an electric switch on the gear shifter which disengaged the clutch.		The German automobile manufacturer, NSU, produced a semi [[Automatic transmission\|automatic]] system for the rotary engined Ro80 saloon car in the 1960s, similar in concept to Citroen's system except that it used an electric switch on the gear shifter which disengaged the clutch.

	Drag Racers have their own type of clutchless manual transmissions. A Liberty is basically a manual transmission with no clutch, and is used in Pro Stock. The Lenco is a transmisson also used in drag racers. A Lenco is different from a Liberty because a Lenco uses planetary gears, like an automatic. Both transmissions can be manually shifted, or use an air shifter. However, they require a clutch to use when leaving off the line for traction. The Lenco uses separate levers to shift while the Liberty uses a single shifter hooked up to several levers. A variation of the Lenco called a Lencodrive utilizes a torque converter and no clutch.		Drag Racers have their own type of clutchless manual transmissions. A Liberty is basically a manual transmission with no clutch, and is used in Pro Stock. The Lenco is a transmisson also used in drag racers. A Lenco is different from a Liberty because a Lenco uses planetary gears, like an [[Automatic transmission\|automatic]]. Both transmissions can be manually shifted, or use an air shifter. However, they require a clutch to use when leaving off the line for traction. The Lenco uses separate levers to shift while the Liberty uses a single shifter hooked up to several levers. A variation of the Lenco called a Lencodrive utilizes a torque converter and no clutch.

	Some variants of the system, such as [[Citroën]]'s Sensodrive, allow the driver to select automatic mode, in which the processor takes responsibility for gear changes. The car then drives much like a standard automatic, including features such as kickdown, but with fuel consumption pretty similar to a manual. Gears can be selected using either stick or paddles, both in manual control and as a temporal change in automatic mode (for example before starting to overtake another car).		Some variants of the system, such as [[Citroën]]'s Sensodrive, allow the driver to select [[Automatic transmission\|automatic]] mode, in which the processor takes responsibility for gear changes. The car then drives much like a standard [[Automatic transmission\|automatic]], including features such as kickdown, but with fuel consumption pretty similar to a manual. Gears can be selected using either stick or paddles, both in manual control and as a temporal change in [[Automatic transmission\|automatic]] mode (for example before starting to overtake another car).

	Semi-automatic transmissions have also made its way into the truck and bus market in the early 2000s. [[Volvo]] offers its i-Shift on its heavier trucks and buses, while [[ZF Friedrichshafen AG]] markets its ASTronic system for buses and coaches. These gearboxes have a place in [[public transport]] as they have been shown to significantly reduce fuel consumption.		Semi-[[Automatic transmission\|automatic]] transmissions have also made its way into the truck and bus market in the early 2000s. [[Volvo]] offers its i-Shift on its heavier trucks and buses, while ZF Friedrichshafen AG markets its ASTronic system for buses and coaches. These gearboxes have a place in [[public transport]] as they have been shown to significantly reduce fuel consumption.

	==Types==		==Types==
	*[[Direct-Shift Gearbox]]		*Direct-Shift Gearbox
	*[[Dual-clutch gearbox]]		*Dual-clutch gearbox
	*[[Electrohydraulic manual transmission]] (e.g. BMW sequential manual gearbox, SMG)		*Electrohydraulic manual transmission (e.g. BMW sequential manual gearbox, SMG)

	[[Category:Automotive transmission technologies]]		[[Category:Automotive transmission technologies]]
	[[Category:Auto parts]]		[[Category:Auto parts]]